Trang chủ » Sản phẩm » Modem GSM/GPRS/WCDMA (3G)/LTE(4G) kết nối RS-232/485 » F2114 GPRS IP MODEM (DTU)

F2114 GPRS IP MODEM (DTU)

Lượt xem: 2366 Lượt xem

Provide GPRS Point-to-Point solution, eliminating the inconvenient of wiring and low cost of installation

It allows to be connected to your remote RS232 serial equipments.

Support network auto-connecting, it can automatically restore the connection to ensure user data integrity under any condition.

With simple configuration makes user instantly configure without extra programming needed.

An embedded Watchdog circuit is provided to avoid equipment shutting down.

An embedded powerful TCP/IP protocol stack.

Customized products are available to meet with customer’s special demands

Chia sẻ:
1

Low Consumption Design

Support multi-sleep and trigger modes to save power consumption

 

Supply 5 I/O
Compatible 2 pulse wave output channels,2 analog inputs and one pulse input counter

 

2
3

Multiple Online/Offline Trigger Modes

Support several online trigger ways,including SMS,ring and data,support link disconnection when timeout

 

 

Suppot SMS Backup

Modem will switch to SMS state to send the data by SMS when GPRS/3G Internet is down or data center is off. Modem can switch back to communication state from SMS state when GPRS/3G Internet or data center recovers.。

4
b

Support Real-time on/off Line

The power consumption is less than 1mA in scheduled power off mode

 

 

Support APN/ VPDN network

Improve the security of data transmission.

a
6
Provide management software for remote management

Convenient configuration and maintenance interface

 

Standard and Band Bandwidth TX power RX sensitivity
F2114 GPRS IP MODEM
EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz(optional)
Compliant to GSM phase 2/2+
GPRS class 10, class 12(optional)
85.6Kbps GSM850/900:<33dBm
GSM1800/1900:<30dBm
<-107 dBm
Item Content
CPU Industrial 32 bits CPU
FLASH 512KB (Extendable)
SRAM 256KB(Extendable))
Interface Type
Item Content
Serial 1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps
Indicator “Power”, “ACT”, “Online”
Antenna Standard SMA female interface, 50 ohm, lighting protection(optional)
SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection
Power Terminal block interface, reverse-voltage and overvoltage protection
Power Input
Item Content
Standard Power DC 12V/0.5A
Power Range DC 5~35V
Power Consumption
Working States Power Consumption
Communication 50-80mA@12VDC;115-150mA@5VDC
Standby 20mA@12VDC;35mA@5VDC
Sleep 8mA@12VDC;18mA@5VDC
Timing Power Off 0.6mA@12VDC;1mA@5VDC
Physical Characteristics
Item Content
Housing Iron, providing IP30 protection
Dimensions 91×58.5×22
Weight 205g
Environmental Limits
Item Content
Operating Temperature -25~+65ºC(-13~+149℉)
Extended Operating Temperature -30~+75ºC(-22~+167℉)
Storage Temperature -40~+85ºC(-40~+185℉)
Operating Humidity 95% ( unfreezing)